Mazda RX7 Coilover Top Hat
Upgraded top hats for coil overs which use 40mm diameter spherical bearings, and 60mm screw spacing.
Upgraded top hats for coil overs which use 40mm diameter spherical bearings, and 60mm screw spacing.
Upgraded top hats for coil overs which use 40mm diameter spherical bearings, and 60mm screw spacing.
These upgraded top hats work for coil overs with 40mm spherical bearings, and M6X1 - 60mm mount hole spacing.
These work for Fortune 500 coil overs on the Mazda RX7 (FC) chassis.
Allows for an additional 1.4 degrees of negative camber over the Fortune top hats.
Maintains the OEM 5 degrees of caster
The top hats are stronger than the normal hats you get with most manufacturers, ours are 14mm thick compared to most others at 8mm. The top locks are designed for way more bearing surface, and low profile for more camber!
Included in order:
2 x Top hats in 6061 aluminum
4 x Top hat locks in 6AL4V Titanium
8 x M8x1.25 x 28mm studs
8 x M8 DIN6923 Flange nuts
We have been using these units in our own FC chassis RX7 on the track for years and stand by their robustness!
